FIRST USAGE
For optimal performance, please read the VORTEXèr operating instructions carefully before use.
(We do not offer individual medical advice, diagnosis or treatment plans. For personal advice, please consult with a medical professional.)
- Wipe the VORTEXèr and lid with a damp, soft cloth.
- Run each Programme once, with new water each time.
- Doing this calibrates the VORTEXèr to your water quality.
- Give the LIVING WATER to your flowers!
IMPORTANT
Always remove the lid when filling the VORTEXèr or placing it in the refrigerator. The lid contains electronic components that must not get wet.
NORMAL OPERATION
1. Remove the lid.
2. Fill the VORTEXèr to the top marking line (Image 1) and place it on a level, stable surface.
3. Fit the lid with the USB cover toward the spout (Image 1), then twist to lock in place.
4. Press the desired Programme button on the lid (Image 2) to start the VORTEXèr.
See the LID BUTTONS – PROGRAMMES section below for more details.
5. Enjoy the bubbling and dancing swirls during the vortexing process. (Image 2)
6. Your LIVING WATER is ready when the VORTEXèr stops rotating.
Recommendation: Wait at least 10 minutes before drinking. For optimal water quality, wait 4 hours for hydrogen molecules to stabilize.
7. Rotate the lid to align the locking tab with the droplet symbol. (Image 3)
8. Pour yourself a glass of LIVING WATER, drink and enjoy it!
Can you taste the difference?
LID BUTTONS - PROGRAMMES
Subtle/Gentle energy activation (3:20 minutes – lower speed)
- Begin here as the preferred way to get your body receptive for LIVING WATER from the VORTEXèr.
Medium/Balanced energy activation (3:20 minutes – higher speed)
- Suitable for normal daily use.
Powerful/Strong energy activation (7:30 minutes)
- Significantly increases the energy of the water and is also suitable for slightly contaminated, calcareous or chlorine-treated drinking water.
- If desired, you can use this programme twice in succession. Wait for water to settle before starting the program a second time.
- Note: It is only advisable to use Programme III twice in succession if your drinking water is of poor quality.)
STEP BY STEP
Week 1:
- Press Programme I.
- Drink ½ – 1 glass of LIVING WATER on the first day.
- If you do not feel any oversensitivity, drink 1 – 2 glasses a day for the next 6 days.
Weeks 2 and 3:
- Continue to use Programme I.
- If desired, drink 1 litre of LIVING WATER per 30kg of body weight per day.
- Listen to your body and extend this period if necessary before proceeding to the next step.
After week 3:
- If you feel stable, start Programme II and increase the energy activation of your drinking water.
- Pay attention to your body’s reactions.
- If you feel any oversensitivity, drink less LIVING WATER.
- When your body has become used to the restructured LIVING WATER, you can begin Programme III and further increase the energy activation of your drinking water.
CARE AND CLEANING
- Limescale stains are best removed with a damp cloth and a little vinegar or lemon juice.
- If washing, please only use chemical-free detergents.
- The propeller and base-button of the VORTEXèr are silver-coated which contribute to an antiseptic effect.
- If necessary, polish the propeller with toothpaste and a soft cloth.
- Polishing will not impair the antiseptic effect.
IMPORTANT
DO NOT place the VORTEXèr lid in a dishwasher or immerse it in water, as this will destroy the electronic components.
CHARGING
- If the LED flashes upon pressing a program button, it’s time to charge!
- While the VORTEXèr may still run a few times, if completely discharged, only the LED will flash.
- Insert one end of the charging cable into the USB-C socket beneath the USB cover on the lid and the other end into a USB charger.
- The LED flashes 3 times, then once every 10 seconds during charging, which may last up to 15 hours.
- Charging is complete when the LED remains steady.
- The VORTEXèr can be used while connected to the charger.
- Once charged, carefully remove the cable and close the USB cover on the lid.
TECHNICAL DATA
- Capacity: 1.8L
- Robust, environmentally friendly certified amorphous copolyester derived from vegetable based sources (BPA, EDC and phtalate free).
- Approved for use with foodstuffs and can be cleaned with vinegar or lemon juice.
- The propeller and grounding disc are double-coated with 30µ pure silver which contribute to an antiseptic effect.
- USB-C port.
- Rechargeable lithium-ion battery.
- Slower charging for extended battery life.
- The vortexing process takes 3:20 to 7:30 minutes at different speeds.
IMPORTANT
Proper disposal of this product helps to save valuable resources and avoid possible negative effects on human health and the environment.
